You are here: Electronic Dog Training Collars > Pet Containment Systems >> Innotek Smart Dog Containment Systems >> Installation Guide and FAQ >> Flower Bed Protection
  Flower Bed ProtectionThis type of boundary set up is a variation of the Double Loop Installation. This variation is used to block the dog's access to a particular area in your yard such as flower beds or your garden. This type of installation can be used with existing fencing as well as other containment installations. Use Double Strand wire to connect the smaller inner loop to the boundary. The boundary wire can be buried in front or inside the beds.
Twisted Wire is used for the run from one bed to another. Using 2 pieces of single strand boundary wire twisted together produces no boundary. We recommend you twist this wire using an electric drill or something similar. You want approximately 1 twist per inch. Remember that as it twists it will draw up, so allow plenty of extra length.
This type of installation gives the dog access to the house.
Caution: You should avoid placing the wire too close the exterior walls of your home. The field can pass through the wall and your dog could receive a stimulation indoors. We recommend you lay the wire out and test the system with the collar prior to burial. You should also check to see if the collar is activated near interior walls. If this is the case move your boundary wire further away from the wall. Take care to not create a gap between the fields. We also recommend that you block the area around the gate and not just the opening.
Click the picture for a larger view.
BROWSE NEXT: Wireless System with Single Transmitter |
|
E-collars Site Map | | |
